Coordinates to Address
Enter latitude and longitude (any format) or click a map and get the nearest street address, plus the ground elevation and the local time zone at that point.
Or click the map to drop a point.
How to turn coordinates into an address
- Enter the coordinates. Type or paste latitude and longitude in decimal degrees, degrees-minutes-seconds or decimal minutes.
- Press Find address. Or click anywhere on the map, or use your device's location.
- Read the address. The headline is the nearest mapped address, with its distance from your point.
- Check the extras. The table adds the postcode, region, ground elevation and the time zone with the local time now.
- Watch the distance. If the matched feature is far from the point, the warning tells you the address belongs somewhere else.
When you have coordinates and need an address
A friend shares a GPS pin
Turn a dropped pin's coordinates into a street address to type into a taxi app.
Reading a photo's location
Camera GPS tags become the address where a photo was taken.
Finding a trailhead or campsite
Guidebooks give coordinates; this shows the nearest road address.
Checking a delivery drop point
See which address a driver's logged coordinates correspond to.
Filling in an incident report
An accident location recorded as coordinates needs a street address on the form.
Verifying a property's coordinates
Check that coordinates in a listing or survey point to the right lot.
Planning a drone or survey flight
Note the address and ground elevation at a launch point.
Scheduling calls with someone abroad
The time zone row gives the local time at their coordinates.
Geocaching
Find the nearest street to a cache's published coordinates.
Data cleaning
Spot-check a coordinate column by turning a few rows into addresses.
Where the address, elevation and time zone come from
The address comes from Photon, an open reverse geocoder run by Komoot on OpenStreetMap data. It returns the nearest mapped feature — a building, a street or a place — and the address parts OpenStreetMap records for it. The page shows how far that feature is from your point, because 'nearest' can be a long way off in the countryside.
Ground elevation comes from the USGS 3D Elevation Program where it has data (the US and parts of Canada and Mexico) and otherwise from the Copernicus 90 m digital elevation model via Open-Meteo. The time zone is the IANA zone Open-Meteo reports for the point; the current local time is worked out in your browser from that zone's rules.
Coordinates are read in decimal degrees, degrees-minutes-seconds or decimal minutes, with N/S/E/W letters or minus signs. They are sent only to the services named on the result.
Limits: house numbers are mapped unevenly, so the result may be a street or neighbourhood rather than a building. Elevation models give the ground surface averaged over a grid cell, not the height of a roof or a summit. Do not use the address for emergency dispatch or legal descriptions.
Sources
Frequently asked questions
What coordinate formats work?
Decimal degrees (40.748817, -73.985428), degrees-minutes-seconds (40°44′55.7″N 73°59′07.5″W) and decimal minutes (N 40 44.929 W 73 59.126).
Why is the address a street and not a house number?
OpenStreetMap only has house numbers where volunteers have added them. Where none are mapped, the nearest street or place is the best match.
Why does it warn that the address is far away?
In remote areas the nearest mapped feature can be kilometres away. The warning appears when it is more than 2 km from your point.
Is the elevation exact?
No. It is the ground height from a gridded elevation model — about 1–10 m cells from USGS in the US, 90 m cells from Copernicus elsewhere.
Why is latitude first?
Latitude, longitude is the usual order. If your source gives longitude first, swap them, or add N/S and E/W letters and the order is worked out for you.
Are my coordinates stored?
No. They go to the lookup services named on the result and are not stored here.
Related tools
Address to Coordinates
Turn one address or a whole list into latitude and longitude, with the matched place name, and download the results as CSV.
OpenStreetMap via the Photon geocoder
Coordinates to City
Paste one coordinate pair or a list of up to 200 and get the city, county, state and country for each, ready to download as CSV.
OpenStreetMap via the Photon reverse geocoder
Coordinates to Country
Paste one coordinate pair or a list of up to 200 and get the country and its ISO 3166-1 alpha-2 code for each, with points at sea flagged rather than guessed.
OpenStreetMap via the Photon reverse geocoder
Coordinates to State
Paste one coordinate pair or a list of up to 200 US points and get the state, two-letter code, county and FIPS codes for each from 2020 Census blocks, ready to download as CSV.
FCC Area API (2020 Census blocks)
Latitude and Longitude Finder
Click anywhere on a map, search an address or use your location and get the exact latitude and longitude in decimal degrees, degrees-minutes-seconds and decimal minutes, ready to copy.
OpenStreetMap tiles and Photon geocoder; WGS84 coordinates
Plot Coordinates on Map
Paste a list of coordinates in any common format, with optional labels, and see them as pins on a map — joined as a route if you like — then download as GeoJSON, KML or CSV.
Your coordinates on OpenStreetMap tiles







